have quite a few small block & Big Block Mopar parts, new & used I no longer need. including W2/W5 head parts. This is a sample of what I have. If you need anything else let me know. Shipped costs below are to lower 48 states. I will ship to other locations for added cost. I will arrange shipping for all items.
New BRC 4.030" Forged Pistons & pins for 3.79" Stoke Crankshaft Compression height is ~ 1.57" & the ring lands are 1/16, 1/16 and 3/16. Pins are 0.984”. Approximately 6cc valve reliefs. These pistons can be used in aftermarket race blocks or stock 360/5.9 magnum engine blocks with 4.030” finished bores. Price is $475 shipped
New Mopar M1 single plane LA intake with FI bungs $480 shipped
Mopar solid lifter cam from kit P4529970 - new. Specs are 526/526 lift ~ 241/241 duration @.050 (284 degrees advertised) 106 LSA. $230 shipped
Mopar solid lifter cam & lifter kit P4120655 - used. Specs are 557/557 lift ~ 252/252 duration @.050 (296 degrees advertised) 110 LSA. Very nice used shape $375 shipped
New Mopar Performance Small Block Mopar 3.79” stroke forged crankshaft part #P4529715. Still has some of the factory protection on the journals. 8 bolt rear flange. Journal sizes are 2.50” main and 2.125" connecting rod journals. This crankshaft is drilled for a manual transmission & has a pressed in pilot bearing installed. Price is $900 plus shipping.
New set of Mopar Performance wide valve covers that support W2, W5 and other LA type cylinder heads. These may also work for other W series Mopar Performance heads like W7, W8 or W9 but I am not certain. Price is $875 shipped.
New sets of small block and big block rocker arm shafts for adjustable rocker arms. Thick walled shafts with removable end plugs and banana grooves to spread the oil to the load bearing area of the rocker arms. $200 per set shipped.
New MSD 7AL2 ignition module part #7220 and a used MSD Pro Power coil that is designed for use with the 7 series ignition boxes. The ignition box comes with all the original hardware still in the package and the harness. The coil was tested and has tested fine. Price is $650 shipped.
W2 Head Small Block Mopar Parts
I have 25 new Mopar Performance 1.5 ratio roller W2 exhaust rocker arms for the W2 & W5 Race heads using offset drilled blocks and shafts. I will sell individual rockers or sets of 2, 4,6 or 8 as needed. Individual rockers are $40 each shipped. A set of 8 is $280 shipped.
14 Harland Sharp used rocker arms & one new shaft. Rockers are a mix of intake and exhaust. Some rockers clearance for valve spring clearance. $400 for the lot shipped.
Used Holley W2 Streetmaster single plane intake manifold. Nice clean shape. All threaded areas are good. $425 shipped
Set of used 2.02” & 1.60” stainless valves for W2 “short valve” Econo heads valves ~ 5.05” long.
Price $175 shipped.
1 new set of W2 heads with casting number ending in 810. Requires offset drilled shafts and blocks. $1,100 plus shipping
I have other parts as well including carbs, intakes, valve train, ignition and rotating assembly parts.
Contact me with any questions with any questions
