The TCM440 Kit is a standalone controller kit for the Dodge 4 speed automatics including the 42RE, 44RE, 46RE and 47RE transmissions and will also work on the RH series. This is a full manual controller with direct control over Gear selection and TCC lock. Requires no programming – Plug and Play. Easily connect the input wires directly to the controller with the new set screw terminal block!
Will hold in any gear selected! **
You can manually Lock the Torque Converter Clutch (TCC) with the Yellow button in 2nd, 3rd and 4th gear!
Includes:
The TCM440 High Speed Controller.
Newly updated Rock-N-Box for a quick and discrete shifts.
Now with adjustable temperature compensation for 2nd gear engage. **
E-TransControl New proprietary 2″ Digital Gauge with Gear, TCC lock indicators.
Simply set a jumper to convert it for use on a RH series transmission for O/D and TCC only.
Input for toggle switch to keep TCC engaged during up shift.
Full Color Instructions and wiring diagram.
Also includes a 6′ transmission wire harness made from TXL high temp automotive wire (transmission connector sold separately).
Note: ** applies to RE series only.
