The bullet lives
#1
Senior Member
RACING JUNKIE
Thread Starter
Join Date: May 2006
Posts: 2,044
The bullet lives
Finally got the bullet in the camaro, it really sounds great too. I've still got some safety issues to resolve then I'll be headed to the track to do some Test and Tuning. I'll keep ya'll posted.
#7
Senior Member
RACING JUNKIE
Join Date: Dec 2004
Location: austin texas
Posts: 729
i Can probably answer that....
So the distributor does not stick out the window cowl and the balancer clears the top of the front crossmember, since the engine is moved back from the stock location.
Most chevy cars do have the engine on quite a angle you just never notice.
I like your car by the way!
So the distributor does not stick out the window cowl and the balancer clears the top of the front crossmember, since the engine is moved back from the stock location.
Most chevy cars do have the engine on quite a angle you just never notice.
I like your car by the way!
#8
Senior Member
RACING JUNKIE
Thread Starter
Join Date: May 2006
Posts: 2,044
The motor does have alittle angle to it, but it's exaggerated by the fiberglass front cap, it leans downward alittle.
Thx the compliments!
So far I've run a best ET of 6.08 @114mph and thats with worn out 14 X 32 Hoosiers.
My short times are 138's to 140's
So needless to say I'm going with some new 14 X 32's phoinex's next spring.
Later Cp
Thx the compliments!
So far I've run a best ET of 6.08 @114mph and thats with worn out 14 X 32 Hoosiers.
My short times are 138's to 140's
So needless to say I'm going with some new 14 X 32's phoinex's next spring.
Later Cp