throttle stops
#1
Member
JOURNEYMAN
Thread Starter
Join Date: Aug 2003
Posts: 34
throttle stops
need some advise
have a sbc with a dominator 1050 -currently using a linkage style
carb does not seem to like it-----should we be using a plate style --if so what kind
stopping from 9 sec to 11.10
thanks
have a sbc with a dominator 1050 -currently using a linkage style
carb does not seem to like it-----should we be using a plate style --if so what kind
stopping from 9 sec to 11.10
thanks
#3
Member
JOURNEYMAN
Thread Starter
Join Date: Aug 2003
Posts: 34
we would like to run super rod #'s but we only have a hotrod class from there we have a class from 8.90 and quicker
we could run just a box class that pays about $300 to win
the rod class and 8.90 class pays $1000 to win
we are not quite fast enough for 8.90
we could run just a box class that pays about $300 to win
the rod class and 8.90 class pays $1000 to win
we are not quite fast enough for 8.90
#6
Senior Member
EXPERT BUILDER
Join Date: Jul 2005
Location: Wylie,Texas
Posts: 276
Sorry, I misread your post. I think if you look at super comp at least 95% of the racers use a under carb plate style throttle stop. I had a linkage dual cylinder stop for my injection system, i used it mostly for the autostop feature. I tried the throttle stop a few times when on a bad track and it was not very consistant.