latter bar car????
#11
Senior Member
RACING JUNKIE
Join Date: Sep 2007
Posts: 4,137
Does it work? If it goes straight leave it alone. You could be opening a big ol can of worms. Mine goes straight as an arrow and it is higher on the passenger side..I bought the car 10 years ago as a roller and asked the guy what did what in the suspension and all he would say was "Don't f#@k with it it works!" :shock: So I have never messed with it. lol
#15
Senior Member
RACING JUNKIE
Join Date: Dec 2007
Location: ohio
Posts: 816
if the car is not preloaded heavy on the driver,which would cause this condition. i would measure the distance from the floor to the bottom of the front frame horn,s, to make sure they were same height. do this on as flat a surface as possible, if the pass side frame horn is lower for any reason, weak spring, bad shock, diff roll out on tires, ect, this would cause the driver side rear to be too high, rather than pass side too low, hope this helps.
#20
Senior Member
MASTER BUILDER
Thread Starter
Join Date: Mar 2007
Location: waynesburg, ky
Posts: 217
ok i got it lined out. its about 1/2" off now less than a 1/16" with me in it. with me in the seat you can wiggle the front passenger side bolt out. now doesnt that sound about right?