BBC Procomp heads
 

I was thinking about buying a set of Procomp Heads for a BBC. Are they junk or are they good?

It will depend on how they will be used. We buy them bare (do not buy them if they have PC parts in them) and check them here in our shop. Some we will have to do valve jobs on and others are ok. Sometimes you will find that the guides are too tight. Over time, we have found out that if you use good parts they have been pretty good. I have a customer that has a set of the CNC 360's on a 525 in a dragster that runs 4.80's in the 1/8th. I probably wouldn't use them on a blown application.lol

Crook Here. Do not buy from Kentucky Speed and Performance aka kyspeedparts. They stole $3320 from me.

How much have you stolen? I recall more than one or two guys on YELLOWBULLET getting ripped off by you!! You even told one dude that you would send his stuff when you were good and ready....said he had to wait because he started crap about you online.... karma is a bitch isn't it scumbag!!

To the original poster...I suggest you talk to "Gungho" on this forum. Despite the bad reputation ProComp has he saysd he has had very good luck with his.I think he bought them bare and had good stuff put in them though.

Yep. Thats what I told him....I forget if I paid him or not....go ask him for me or better yet PM him this link and lets ask him if he was paid. You recall 1 person saying I owed them genius and he was paid. The money I dont care about because I have re-paid the guys who needed an ignition box, and I consider it a loss....this guy is a crook and a thief. My mission here is to destroy Kentucky Speed and Performance aka kyspeedparts owned by Dwight Workman. Just as you saw I did on YB, I will hold my own here too.

:roll: :roll: :roll: :roll:

The only thing you did on Yellow bullet is make yourself look like a bitch.So what if you paid them....how long did it take you?And you only paid up after it was pushed and someone found out who you were etc..I don't remember. All anyone needs to do is go over there and read...there is enough there that as soon as I saw your name I remembered the crap from last summer....So, all you do is make yourself look bad and hurt your chances of selling stuff in the future. That's the reason I brought it up here.Let people go over there and read the thread and make up their own mind. Your character comes through in the way you conduct yourself in that thread. Good luck with your Paypal dispute.If you are really in the "right" I'm sure they will pay you....eventually.

you really arent that smart are you? paypal has closed the dispute. the dispute is over, they tried to take the money from kyspeedparts aka Kentucky Speed and Performance but they had already stolen all the money. Did you bother reading the email I got from Paypal where it confirmed this? Paypal is a crook just like kentucky speed and performance. This happened in June of last year. what do you mean after someone found out who I am? go take a look at the thread I put my address in the thread, I welcomed anyone who wanted to bring it or have a discussion. kentucky speed and performance are crooks, they are thieves and they stole money from me. my mission is to destroy their business. if someone has a second thought of buying anything from them and decide to buy else where. I win.

twin fogger you cryscammer but the gentleman you accuse said probe it and he would square it up yet you dont sounds to me like yours the crooked scammer

i have proved i paid him and he took the money. lets see him prove that he refunded the money or sent what he was paid for or that paypal took the money from him. i have proven all i needed to. i expect you clowns to take the side of an obvious thief. thats how this world works. he hasnt proven anything. what the hell am i trying to scam the guy out of? i dont need to scam anyone out of anything.

dude, this thread was started by someone asking about pro comp heads. why dont you take your spitting match to one of the three other threads you started

Oh...so he really DID steal your money? Well, in that case

HAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHA!!!!!!!

LOL my thoughts exactly.

hey beast this azz clown just like little rod to me and as annoying to starts multiple posts and jumps in everywhere his dribbling and sniveling hiss cc gave him back his money and if me id question his order too. sound like kentuky speed covered his ass on products he would have gotten scammed out of

You should go read the other thread carefully. Particularly KSP's statement.


Back to how much PROCOMP heads suck or don't suck. :)

tod on the whole ksp thing until they both prove disprove ill stay out and wast there a whole thread on theses heads

There are many threads about these heads..that's why I suggested he PM gungho. Gungho has a set, most can only report what we have heard.

We have used 5 or 6 sets so far. We have never used a complete set opting to buy bare and put our components in. They seem to work good. We have used only Jesel so far so I can't tell you if the rocker bosses hold up. I am neither thrilled or dissapointed.......Yet.

How do you think they would do on a BBC street motor 396/427 for my Chevelle? I have been thinking about getting a bare set.

We have done a lot of these heads we also get them bare and put good parts in them and have never had a problem with them Now I'm not telling you that they are the best head out there if so you couldn't buy them for the price they are .
But on the same hand if a shop checks them and put's good parts in them they are worth the money .
also it depends on what you are trying to do with them like anything else build them and use them for what they are intended for .

They will work fine for the street and mild race engine's as long as you use good parts in them.

That's just my opinion of course and i have sold plenty of them with no issue's

We have had no problems yet. I think they are a good deal for the price. I would never buy them complete as I want to know what is in them for sure. The castings seem fine and are stronger than the stock bbc alum heads in the rocker boss, but I would'nt get crazy on spring pressure. We port them a little and they seem to flow ok. IMO they are worth the money.