lol. i know. it is taking some getting use to.

LOL...Is that one of them foreign jobbies?

Avery just go and jump in the 'HOT GIRL" 'STD" mode and blow it all to hell and have some fun out of that Ford motor before you pull it out...i would yank the crank bolts out so hard i would Make SCOT WITH DYNOFLOW JEALOUS.....LOL..

Brian

EASY CHEVY RACERS---THERE ARE ALOT AND I MEAN ALOT OF VERY FAST SMALL BLOCK FORDS OUT THERE THAT ARE NOT FOUND ON THE ROAD DEAD 8) 8) 8)

Yes and some fast BBF's as well.

and .................................... :?: :?: :?: :?: :?: :?: :?: :?: 8)

where at? i have yet to see a sbf that ran good without power adders....must be why they all use chevy internals??

i'm kidding of course, don't want no guff just a little friendly ribbing! i've got a buddy with a ford and we have a good old time with each other, i tell him if he wants to go fast to put a chevy in it, etc :shock:

Nova
 

Here is the car I currently have that I am trying to trade for a different hot rod
http://i85.photobucket.com/albums/k4...11/nova001.jpg
http://i85.photobucket.com/albums/k4...11/nova003.jpg

http://i174.photobucket.com/albums/w...0006Medium.jpg



http://i174.photobucket.com/albums/w...0007Medium.jpg


http://i174.photobucket.com/albums/w...0009Medium.jpg

Next step....disc brakes

robsta11111 it sure looks like you are off to a very good start on the hotrod that you now have. I think if it where me but its not I would finish the nova out because its a very nice car and just take my time and enjoy the upgrades one peice at a time. That of course is just my 2 cents and its a nice hotrod. Wesley

Carl keep up the good work you are doing all the good. Wesley

WOW !!..IS THAT DUDE FLAGGING YOU GUYS OFF ?....LOL

Brian

http://i174.photobucket.Com/albums/w...ppedMedium.jpg
My street car runs mid-11's on the street tires,... and I'm ok with that. 8)
No pic,.... Hmmmm... darn "oldtimers" disease. Better check it out.

ash dont beat yourself up because it is not easy getting pictures on here. If my wife was not so smart I would not have any on here myself.
By the way. That's a very good time for a street car and better yet that you are ok with your time.
That statement alone will save you a whole lot of money. Well have fun with it and cant wait to see it. Wesley

My fault Ash.....

Sent you an email that will fix the pix.

Me sorry :oops:

Carl...Thank-you for your help!! :D It's not your fault! If I knew what I was doing, I wouldn't have so many problems! The "old timers" disease I have will hopefully work it's way out of my system by next w/e in time for making a few passes at the track!! :lol:
A couple more:
http://i174photobucket.com/albums/w1...tchangetoJ.jpg
http://i174photobucket.com/albums/w1...opy1Medium.jpg
see... get me close to a computer and BOOM! I'll try again.

Ash,

That is one SWEET Camaro!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Give me a call if I can help at all!

I do love that car!

11'S WITH STREET TIRES IS GREAT IN MY BOOK!!!---GOOD GOING!!!! :lol: :lol: :lol: NICE CAMARO 8) 8)

This is My old stang( why i chose the name swt stang), i should have never sold it. some lucky couple in VA has it now

http://img509.imageshack.us/img509/5957/p1000532hl0.jpg

]http://img108.imageshack.us/img108/6...smallervo6.jpg

http://img512.imageshack.us/img512/378/p1000533hx7.jpg

You're right, swtstang, it is! Those rims with that stance is just right. 8)

swtstang I think you are right should not have ever sold it. It is a nice looking ride and looked finished from what I seen. Wesley

http://174.photobucket.com/albums/w1...tchangetoJ.jpg
http://174.photobucket.com/albums/w1...opy1Medium.jpg
Thanks lively. Thats an ego booster.
Thank-you very much,Carl! :D I do appreciate your help!!
I'm going to the track this week-end. I'll post some times If I don't break something. :roll:

8) Here's my racing Junk renovation project! :D

http://i108.photobucket.com/albums/n...a/Evmp0746.jpg

http://i108.photobucket.com/albums/n...a/Evmp0752.jpg

http://i108.photobucket.com/albums/n...a/Evmp0750.jpg

http://i108.photobucket.com/albums/n...a/Evmp0748.jpg

http://i108.photobucket.com/albums/n...a/Evmp0755.jpg

cobrajet428 you are doing all the good keep up the good work and have fun with your build. Wesley

cobrajet, hell ya, backhalfed and everthing, looks good, I like that ford, OH MAN I SAID THE F WORD my dad would be so proud!!!!!! congrats looks very nice 8)

Cobra, I like your stang.

:idea: :idea: LIKE IT!!!!! :lol: :D :lol: :D :idea:

Cobra,

That Mustang looks bad ass!

Thanks Guys
 

Here's a little more data on the car and project. I've had the car since 1986. It went with me to Panama in 1990 while in the Air Force to oust Noriega. Had a great time with it there. After the invation, we used an old air strip and would drag race the locals. Never lost! It was basically a 67 coupe street car with a mild 428cj then. When I got back from Panama I got stationed at Goldsboro NC. There I started modifying it into a street/ strip back half car with an 8 point roll bar, narrowed 9" with 4.56 gears, adjustable coil over shocks, ladder bars and 14X32 tires. Ran 7.50's. I later removed all the interior, glass windows, metal dash and added a fiberglass hood, bumpers and trunk lid (still a coupe). I also built a new 428cj. I installed lexan windows, aluminum interior, one fiberglass seat and repainted the car black again. I have some of those photos if you care to see. I wrecked the car in 2000 at the Ford Expo at Columbus Ohio. Ran 10.60 @ 121 mph. I replaced the front chassis clip and sheet metal from the firewall forward out of a 68 GT, the two left tires and wheels and left rear quarter panel and repainted the car black again!. It took me two years! I raced the car in NC and then in central Fl. till last year that I threw a rod. I decided to build a new engine and re-skin the car with fiberglass parts, add a halo and an Xbar to the cage, window net and a fastback top. That's where I'm at now trying to finish it. The new engine will make approx 680 hp and 640 ftlbs of tq. The wole thing will weig approx 2500 lbs with me and fuel and should run mid 9's. We'll see! George

http://i154.photobucket.com/albums/s...e/Img_0159.jpg
In progress. Next is the body work, then on to the fun stuff with the motor and trans.

jmech that is looking very nice and I hope you enjoy it when you finish. Keep it safe when you get to the track and most of all I hope it runs the numbers that you are looking for. Wesley

jmech,

Nice Chevelle!!!

It looks like it is going to be Faaaaaaaaaaaaaaaaast!!!!

Keep us posted on its progress!

If you need anything holler

That's coming along great!
 

I hope to take the body off the current home made square tube chassis and drop it over a nice tube chassis like yours someday. Not this time around. Converting the coupe into a fastback with fiberglass body panels is the fourth make over I give my mustang race car. This is what it looked like during the previous phase.

http://i108.photobucket.com/albums/n...aceCarIV13.jpg

http://i108.photobucket.com/albums/n...aceCarIV12.jpg

http://i108.photobucket.com/albums/n...RaceCarIV8.jpg

http://i108.photobucket.com/albums/n...ceCarIV9-1.jpg

Holy Moly Cobra.....that is a sweet square back.
I am such the chevguy but that is just NICE!!!!!!!!!!

Not any more!
 

That's how it use to look. Everybody told me I was crazy for cutting it all up to make a fastback out of it. But I think it will look even nicer when I'm finished. I just like the fastbacks more than the coupes and I just happen to have the top laying around. Check out what it looked like when I cut the top off. :lol:

http://i108.photobucket.com/albums/n...a/Evmp0737.jpg

http://i108.photobucket.com/albums/n...a/Evmp0736.jpg

http://i108.photobucket.com/albums/n...a/Evmp0745.jpg

http://i108.photobucket.com/albums/n...a/Evmp0743.jpg

nice....you did real good..i didn't know FLY boys could build 'HOT RODS" like that....JUST KIDDING......I LIKE IT ALOT..

brian

Thanks Juice, This flyboy has gotten his wings clipped! :lol: I like flying down the track now but I want at least my two rear wheels on the ground for the first 60 feet and all four for the rest of the run. I have put the shinny side against the wall in the past. It's no fun. :cry:

http://i108.photobucket.com/albums/n...aceCarIII3.jpg

http://i108.photobucket.com/albums/n...aceCarIII4.jpg

Thanks for the kind words guy's. I know it doesn't look like mutch right now. Cobrajet428, it looks like you have some work to do. Mutch easyer with the roof out of the way. I'v had the body on and off the chevelle at least 3 times. Right now its hanging from the cieling, and the chassis is upside down on the floor so i can finish welding. Ever try tig welding on your back with a foot pedal LOL.