en-us Thu, 13 Aug 2026 21:02:48 GMT 184801290 https://motorheadmedia.com/rear-ends/184801290/9-ford-pro-rear-end-.html 9" Ford Pro rear end (I think out of a 97 Pontiac Firebird pro stock car) Mark Williams axles 40 spline gun drilled 4-4 link bars. Bars are 17.250 w/heims 20.750 Housing 30.750 with axles 37.00 outside to outside, Axles - right 18.250, left 15.375 Number on Axles 2007 1 or J. $2000.00 for everything or OBO

]]> Chassis/Suspension/Brakes/Driveline: Rear Ends Thu, 13 Aug 2026 07:50:03 GMT 184821203 https://motorheadmedia.com/rear-ends/184821203/mark-williams-modular-ford-9-housing-bare-.html New Mark Williams Modular Ford 9” Housing (Bare)

]]> Chassis/Suspension/Brakes/Driveline: Rear Ends Mon, 10 Aug 2026 12:50:20 GMT 184819967 https://motorheadmedia.com/rear-ends/184819967/tim-mcamis-9-housing-blank.html I have two of these available. One is standard width (pictured) and the other is narrow width. They're both chromoly with a 3/8” face plate with threaded holes. Axle tubes are 3.5”. If needed, I can finish it with fill/drain/vent, housing ends, 4 link brackets, back brace, etc. I'm also a dealer for HC&D and can make you a complete 11 sided housing.

]]> Chassis/Suspension/Brakes/Driveline: Rear Ends Thu, 06 Aug 2026 11:47:06 GMT 184431692 https://motorheadmedia.com/rear-ends/184431692/12-bolt-rear-end-67-69-camaro-firebird-stock-length-.html 12 Bolt with 35 spline strange axles,spool 4:10 pro gears, upgraded 5/8 studs, chromoly billet yoke, Aerospace lightweight disc brakes, sale also includes; Strange 33 spline axles and another set of 4:10 gears.

]]> Chassis/Suspension/Brakes/Driveline: Rear Ends Thu, 06 Aug 2026 07:45:10 GMT 184819808 https://motorheadmedia.com/rear-ends/184819808/nodular-rear-end.html Nodular 9” ford rear end. 33 spline 4.86 gears. No axles. For 1963. 43” long housing

]]> Chassis/Suspension/Brakes/Driveline: Rear Ends Tue, 04 Aug 2026 17:31:44 GMT 184816474 https://motorheadmedia.com/rear-ends/184816474/gm-12-bolt-car-rearend.html Forsale is a 12 bolt car rearend. It was originally for a 1966 Impala SS. It’s 62 inches in width. It has mounts for a leaf spring car now. It has a brand new housing cover and Auburn Gear positive traction unit with Richmond Excel 3:55 gears. It also has Right Stuff rear disc brakes. It would actually be a perfect fit for 70-81 Chevy 2nd Gen Camaros. Price is $2500. Call 334-405-8212.

]]> Chassis/Suspension/Brakes/Driveline: Rear Ends Sun, 02 Aug 2026 22:07:52 GMT 182834579 https://motorheadmedia.com/rear-ends/182834579/10bolt-posi-ladar-bar.html Older 10bolt posi(out of a 80'snova(built with 488posi(richmond gears(had 500hp 56chevy I put it in,then I put a 840hpengine,changed the rear to a strange rear set up,maybe 1000miles on rear

]]> Chassis/Suspension/Brakes/Driveline: Rear Ends Mon, 27 Jul 2026 07:45:14 GMT 182739944 https://motorheadmedia.com/rear-ends/182739944/complete-4link-art-morrison-strange.html New complete link with all related parts. Also have 67 chevelle rolling chassis

]]> Chassis/Suspension/Brakes/Driveline: Rear Ends Thu, 16 Jul 2026 07:45:10 GMT 184810190 https://motorheadmedia.com/rear-ends/184810190/richmond-4.33-9-inch-ford-gears.html I have a brand new set of richmond 4.33 9-inch ford gears. These are about 20 years old but brand new. $200 plus shiping and paypal fees.

]]> Chassis/Suspension/Brakes/Driveline: Rear Ends Sat, 11 Jul 2026 18:08:29 GMT 184808285 https://motorheadmedia.com/rear-ends/184808285/yukon-hd-nodular-9-center-section-bearing-kit-1350-yoke.html Yukon #32100 HD Nodular iron case with 3.25" bearing size(35 or 40 spline axles). Comes with a complete Timken bearing set. Nodular iron Daytona pinion support. 1350 billet steel yoke. Standard 28 spline pinion. 9" full size drag race spool. Just provide your own set of ring and pinion gears.

]]> Chassis/Suspension/Brakes/Driveline: Rear Ends Thu, 02 Jul 2026 02:46:37 GMT 184704978 https://motorheadmedia.com/rear-ends/184704978/complete-rear-housing.html Strange Engineering Aluminum Rear Housing 33" Width Strange Engineering 9.5' Rear Center Section With 430 Ratio Pro Gears, Large Pinion And 1350 Yoke Strange Engineering 40 Spline Pro Axles, Rifle Drilled Strange Engineering Steel Disc Brakes Steel 4 Link Mounts With 1/2" Bolt Holes, 15 3/4" Center On Brackets 10 to 15 Runs On Rear Since New In 2022 Call Steve 410-360-4020

]]> Chassis/Suspension/Brakes/Driveline: Rear Ends Wed, 01 Jul 2026 07:45:12 GMT 184806674 https://motorheadmedia.com/rear-ends/184806674/strange-center-ultra-case.html Strange Ultra case 40 spline spool with 4.10 gears. 9.5 ring gear. Both dragster and U bolt yoke. Includes 8 magnet Racepak sensor. Contact Rick with any questions 562-618-3248

]]> Chassis/Suspension/Brakes/Driveline: Rear Ends Sat, 27 Jun 2026 19:41:32 GMT