en-us Sat, 25 Apr 2026 09:25:52 GMT 184744932 https://motorheadmedia.com/intake-manifolds/184744932/fabricated-aluminum-ls-intake-manifold-102mm.html Designed for LS1, LS2 & LS6 cylinder heads with cathedral intake ports. Made from 6061 aluminum and TIG welded for strength and durability to suit most high performance applications from naturally aspirated setups to forced induction. Features a 102mm GM 4-bolt throttle body mounting flange, threaded vacuum ports and an LS3 style MAP sensor port. Includes billet fuel rails, steel braided crossover fuel line, vacuum port fittings, mounting hardware and o-ring gaskets (manifold and throttle…

]]> Engine Parts: Intake Manifolds Fri, 24 Apr 2026 07:50:04 GMT 182781907 https://motorheadmedia.com/intake-manifolds/182781907/fast-lsxr-intake-manifold-ls3-rectangle-port.html LSXR│Rectangle Port Heads (LS3, L99, L76) From FAST: "FAST" engineers teamed up with airflow specialists at RHS to develop polymer intake manifolds for GM LS based engines. Testing on a near stock LS7 engine with a Big Mouth 102mm Throttle Body™ produced gains of 16+ horsepower, and 26+ rear wheel horsepower on a 500ci engine. The LSXR 102mm Intake Manifold features a revolutionary new modular design that allows fast and easy disassembly and features the ability to remove…

]]> Engine Parts: Intake Manifolds Fri, 24 Apr 2026 07:50:04 GMT 183098512 https://motorheadmedia.com/intake-manifolds/183098512/custom-manifold-water-necks.html Big and small block water necks built to your specs

]]> Engine Parts: Intake Manifolds Fri, 24 Apr 2026 07:50:03 GMT 184783120 https://motorheadmedia.com/intake-manifolds/184783120/edelbrock-426-hemi-ratroaster-inrake.html For sale is a Nice EDELBROCK 426 HEMI 2X4 CARBS Manifold . Buyer pays shipping

]]> Engine Parts: Intake Manifolds Fri, 24 Apr 2026 01:51:06 GMT 184783102 https://motorheadmedia.com/intake-manifolds/184783102/profiler-tunnel-ram-top-plate.html used for one day fits the sniper BBC t-ram with 2 doms comes with the special bolts and gasket $275 US DOLLARS SHIPPED TO USA OR CANADA

]]> Engine Parts: Intake Manifolds Thu, 23 Apr 2026 18:51:13 GMT 184598134 https://motorheadmedia.com/intake-manifolds/184598134/edelbrock-sv632-2897-intake-with-speedtech-fogger.html EDELBROCK 2897 SV632 INTAKE WITH NEW SPEEDTECH LIQUID FORCE FOGGER AND PURGE. INTAKE IS PORT MATCHED TO A FELPRO 1275 GASKET. PRICE DOES NOT INCLUDE SHIPPING. PLEASE CALL WITH ANY QUESTIONS ISLAND RACING 802-372-8565

]]> Engine Parts: Intake Manifolds Thu, 23 Apr 2026 07:50:02 GMT 184782876 https://motorheadmedia.com/intake-manifolds/184782876/new-edelbrock-victor-jr.-2967-aluminum-intake-for-sbc.html I bought this new to build a spare racing engine and ended up selling the race car before I could get the new engine put together. It is new old stock still in the factory plastic. It has never been ported or installed. These are great high-performance intakes that are no longer being manufactured. It was designed for the first generation SBC with the RAISED RUNNER heads and accepts a square bore 4150 carb. I also have a new set of Fel-Pro gaskets that are included. Free ground shipping to lower…

]]> Engine Parts: Intake Manifolds Wed, 22 Apr 2026 12:27:16 GMT 184782874 https://motorheadmedia.com/intake-manifolds/184782874/intake-manifold-chevrolet-.html FOR SALE $600 plus shipping. Chevrolet/ Winters 3972110, 1970 factory installed LT1 350 aluminum high rise intake manifold. This part number was ONLY available from the factory on a ‘70 Corvette or a Z/28 Camaro that was ordered with the LT1 350 engine option. Look closely at the pictures. This intake HAS BEEN MODIFIED. The plenum divider has been cut down 3/4” and the plenum area has been nicely smoothed and radiused. Also the ports have been1205 gasket matched. Thank you!

]]> Engine Parts: Intake Manifolds Wed, 22 Apr 2026 11:34:28 GMT 184349790 https://motorheadmedia.com/intake-manifolds/184349790/new-sheet-metal-intake-front-throttle-body.html 9.8 Deck Height made for Pro-Filer Hit Man style heads will also fit Brodix and Dart heads also, front Throttle body 125MM throttle body, will make a different top for a small fee, This manifold cost 3500 customer gave deposit and didn't pick up, will sell for 2100 less top will make any style top for 300 extra will make a dual carb top for 100 extra. Contact Mike 513-607-2592

]]> Engine Parts: Intake Manifolds Wed, 22 Apr 2026 07:50:02 GMT 182590916 https://motorheadmedia.com/intake-manifolds/182590916/pro-filer-sniper-sniper-jr-intake-manifolds.html Profiler BB/Chev Racing Manifolds Sniper and Sniper J 735 each 950 port matched to heads and bended under carb and 1200 completely ported There know to the most powerful manifold made today, we also carry the complete line of Profiler racing heads check us out on racing junk or at www.weinlemotorsports.com or contact Mike 513-607-2592 353-1067607-2592

]]> Engine Parts: Intake Manifolds Wed, 22 Apr 2026 07:50:02 GMT 182256196 https://motorheadmedia.com/intake-manifolds/182256196/efi-fuel-injection-manifolds-u-weld-it-.html We Custom Build Sheet Metal Intake Manifolds All Makes And Models Your Design or Ours EFI Single or Dual Throtle Bodies Tunnel Rams and Blower Manifolds, We Also offer them in a U-Weld it kits starting at 900 dollars, Everything we do is Custom call Mike the owner for more info 513-607-2592 353-1067 607-2592

]]> Engine Parts: Intake Manifolds Wed, 22 Apr 2026 07:50:02 GMT 2913775 https://motorheadmedia.com/intake-manifolds/2913775/pro-filer-sniper-tunnel-ram.html Manifold bases run 995 dollars the tops are 295 available in single or dual dominator topAbove Added: Sat June 28, 2014, 10:59 am ESTBrand New Sniper tunnel rams starting at 995available with or with out top available 9.8 and 10.2 deck height contact mike for more info 513-607-2592 353-1067

]]> Engine Parts: Intake Manifolds Wed, 22 Apr 2026 07:50:02 GMT