PE Racing offers you lightweight, reliable & high-performance Racing Pedal assemblies with Patented adjustable features to suit your driving style & increase performance.
Designed for the Driver,
NOT LIKE ANY OTHER FLOOR MOUNT PEDALS.
This PE Racing Patented design came about as a result of common problems experienced while installing pedal assemblies to a range of race cars over many years.
Initially a typical floor mount frame usually has a relatively short flat footprint, the brake pedal forces ultimately create large moment forces to the floor, the moment reactions needs to be resisted by the floor connection & usually results in needing to reinforce the mounting footprint to do so, adding unnecessary material & work was usually found necessary.
The stiffness of the mounting is directly linked to driver feel.
Improved stiffness is desired & can involve much work & addition of undesired weight to do so.
What we did was go back to the beginning to find what can be done to not only increase stiffness, but equally as important, to reduce the finished installed weight.
So our frame Patented design was ultimately the outcome.
It has a little more going on than meets the eye, so here's a little more explanation.
Initial visual inspection will show that our mounting feet are not just far apart, but also articulate.
The purpose of the increased span distance is to reduce the moment reaction forces from high forces on the brake pedal.
This means that the structures required for connection are vastly reduced, reducing weight & increasing stiffness.
The next unique Patented feature is the articulating, or pivoting mounting feet.
The purpose of these adjustable feet is to conform to the actual angles made during installation.
These mounting feet connect direct to the pivots & pins transmitting the forces to the frame system & eliminate bending forces as a result.
We saw this as a win/win on all fronts.
More common problems were experienced while installing pedal assemblies, some of these were related to the pedal & lever adjustments available, and positioning things would
sometimes lead to poor push-rod geometry & irregular force v's pressure feel, especially on brake pedal.
Similar issues were often experienced with the throttle pedal actuation characteristics.
As a result, our Patented design has several features to assist & make things easy & comfortable for the driver.
The video covers these topics in more detail.
This Patented Frame Design includes;
Adjustable Mounting Feet,
Fits easy to a variety of floor shapes.
Adjustable Pedals Faces and,
Adjustable Throttle geometry.
We focus on quality & performance.
Features include Adjustable Pedals, an Adaptive Frame and Adjustable Brake Bias.
The system allows easy tuning of both Throttle Ratio and progression, Pedal Ratio, Clutch and Brake ratio.
The design allows you to make finite adjustments easily without disassembly.
Pedal face adjustments are independent and will not affect push-rod geometry for efficient operation.
Billet 3 Pedal weighing at only 2.8kg and Billet 2 Pedal nets at 1.92kg.
Caters for Cable or Drive by Wire Throttle Systems.
Suits PE Racing Pedal Slider & Sim Kits.
Made from high-strength aircraft alloy to withstand superior loads.
Available on our online store. https://www.peracing.com.au/collections/racing-pedal-assemblies
Please check out other products.