250 - LS Chevy LS1 LS2 and LS6 Cathedral port Blower Package - The Blower Shop 250 Complete with Manifold and Drive
LS1 LS2 LS6 - 250 Blower Setup - Complete Kit
Fits under hood usually with no modifications - overall height of manifold, blower and carb adapter is 10.56"
Solid Billet , with Billet 2 lobe rotors. Mirror like polishing.
makes PLENTY of boost for any engine up to 450 cu in - for Street or Marine use
Great Street sleeper blower to hide under the hood.
Street engines on pump gas will have to have 9-1 compression or less or use our Torco Octane booster to raise 93 octane to 103
Also Used in High Compression LS Chevy Race cars to add 3-4 lbs of boost to equalize Atmospheric
conditions when the air gets dirty, and/or corrected elevation and density altitude caused a negative impact on your ET .
A 71 style Supercharger sticking out of the hood is always a nice addition, but it may not be what you are looking for. With our 250 BilletCharger blower series we have solved that problem. Still producing the most boost in the industry these dangerously powerful blowers come in a beautifully small package. Perfect for tight clearances and low profile under-the-hood applications.
2 Lobe Straight Rotors w/ Teflon* will make 10-12 lbs boost on a LS - even 450 cu in
Specs:
Billet Case
CNC machined 6061-T6 Aluminum
Increased Strength over cast
Hard Anodized Interior
Mirror-Like Polish
Low Profile Design (6.56” tall including Billet Carb Adaptor)
Single or Dual Carb (4150 or 4500 *Please Specify when Ordering)
2 Lobe Rotors
Billet Extrusion
Teflon OD Stripping
Full length rotor shaft for increased strength
Maximum boost at low RPM
Billet Front Cover
Oil Level Sight Glass
Oil Drain Plug
Polished Pressure Relief Valve
Billet Bearing Plates
Increased Strength over cast
Hard Anodized
Included:
250 Billet Supercharger with Snout
Intake Manifold Cathedral or Rec Ports ( LS3 only ) (4.31” tall, machined for water and Polished)
Accessory Pulley 2V belt or Serpentine
Supercharger Pulleys (*Please specify engine size and desired boost when ordering)
Belt (16 Rib Serpentine style)
Idler Assembly (Spring Tensioner, Pulley)
All Necessary Gaskets and Hardware
you will need a Aftermarket Balancer with a 6 bolt Blower Bolt pattern or we can supply a Blower Hub for Approx $195 or Innovatorss West Balancer for $495