.
SPECIAL SALES "PROMO"...TOP SPORTSMAN BLOCK & CRANK -- 509 up to 632 cu in
Includes CHOICE of DECK HEIGHTS EITHER a MERLIN (MADE IN USA) Short Deck 9.800 Block or 9.850 OR Tall Deck 10.200 Block or 10.250 Block TOP SPORTSMAN Block Rough Bore Sizes VARY depending on exact block bore chosen , from approx 4.250 or 4.500 or 4.600 bore sizes -- CRANK is a MADE IN USA > FORGED 4340 STEEL-- CALLIES "COMPSTAR" series (Version 1) OR CALLIES "MAGNUM" Series (Version 2) with 4.00" or 4.250" or 4.375" or 4.500" or 4.625" or 4.750 Stroke (Other Stroke Cranks can be special ordered for Extra $$--Inquire)..Block & Crank Combo's Subject to Supply being Available at time of order
>> "PROMO" PRICING
--VERSION # 1..$4599.00. and UP + Shipping/Handling..
--VERSION # 2..$6999.00 and UP + Shipping/Handling.
**** SEE DESCRIPTION of EACH VERSION DOWN BELOW and Also FOR description of STRONGEST IRON BLOCK ON THE MARKET"
>> OPTIONS--ONLY AVAILABLE for VERSION # 2 --UPGRADE BLOCK to MERLIN Block Version that comes with UPGRADE to .903/.904 Lifter Bores & Larger 55mm Cam Tunnel -- ADD $699.00
WE ALSO CAN SUPPLY 2618 ALLOY PISTONS and FORGED 4340 STEEL CALLIES "EXTREME Or "ULTRA" series RODS OR MOLNAR "POWER ADDER" RODS OR GRP ALUMINUM RODS for MOST APPLICATIONS ....For Naturally Aspirated Engines or Engines using NITROUS OR BOOST--INQUIRE
----------------------------------------
***STRONGEST CAST IRON BB CHEV RACE BLOCK ON THE MARKET. Some Versions Will Handle up to approx.3000+HP
THE PERFECT BLOCK FOR "BIG HORSEPOWER" BBC "POWER ADDER" ENGINES..EG HEAVY MULTI STAGE NITROUS-- BLOWN GAS OR ALKY--TURBO--PRO CHARGER etc.
POSSIBLE CUBIC INCH VERSIONS -- EG 509 or 525 or 540 or 555 or 565 or 572 or 598 or 620 or 632 + More
*** 2 VERSIONS of BLOCKS AVAILABLE..
>> Version #1 Block...CHOICE of approx 4.250 or 4.500 or 4.600 Bore and Choice of 9.800 or 9.850 or `10.200 or 10.250 Deck.... ALL With HD NODULAR "SPLAYED" 4 BOLT MAINS & ARP MAIN BOLTS, Rated in Strength up to approx. 1500HP.
>> Version #2 Block Available with same Bore Sizes & Deck Heights as Version #1 -- "BUT" WITH "BILLET STEEL" SPLAYED 4 BOLT MAIN CAPS & ARP MAIN "STUDS", Some Rated in Strength up to approximately 3000HP.
.. VERSIONS 1 & 2 ALLOW Choice of MAIN CAPS--HD NODULAR or BILLET STEEL. The "STRONGEST" BOTTOM END with THICKER MAIN WEBBING & "BILLET STEEL" 4 BOLT MAIN CAPS with CENTER 3 being "SPLAYED"-- with "STEPPED" MAIN CAP REGISTERS & with DOWELS PINS for Main Cap alignment & Finally ARP MAIN "BOLTS" OR (ARP "MAIN STUDS" for XTR $) .. EXTRA THICK Cylinder Walls .. DECKS that are .600 THICK.. INCREASED VOLUME Priority Main OILING System & with Front Oil CROSSOVER Feed.. EXTRA CAPACITY COOLING SYSTEM with EXPANDED WATER JACKETS.."HI-DENSITY" Cast Iron construction.. Easy Access Front oil Inlet & Oil Restrictor Provision.. Can be used with WET SUMP OR DRY SUMP OILING SYSTEMS.. ..( "OPTIONS Available" for Extra $-- Cam Tunnel can be Bored for 55mm Cam and Lifter Bores can be Machined for Bigger OD .903/.904 Lifters.. Inquire for price) )
MERLIN BLOCKS-- by WORLD PRODUCTS
FEATURES include thicker main webs
for increased strength and thicker cylinder walls which are nominally .310” @
4.600” bore. The oiling system is revised
with enlarged passages and cross overs
in front, uses simple pipe plug type restrictors, .500 oil gallery is relocated so
55mm cam does not require lifter bushings. The block will accept cam journals
up to 2.480” or 60mm Babbitt and 1.060”
lifter bores. Also new are deck heights
from 9.500” to 9.850” and 10.200” to
10.250”.
= High density cast iron construction
= DECKS that are .600 THICK
= PRIORITY MAIN OILING SYSTEM
= Front oil inlet and restrictor provision
= Bores to 4.625 (4.245, 4.495 or 4.595 std.)
= Cylinder walls .310” @ 4.600
= Valley accommodates OE roller lifters
or use +.300” tall aftermarket lifters
= 9.500” to 10.250” deck heights
= Clearance for 4.750” stroke (10.200” deck)
or for 4.375” stroke (9.800” deck) when using Most Steel Stroker Rods
= Splayed 4-bolt main caps w/dowels &
stepped register, ARP fasteners
= 2.120” BBC cam bearing bore
= 10.2 Deck/4.595 bore is Available with 55mm cam bore & .904 lifters
= OE style fuel pump & starter mounts
= Approximately 270 to 290 lbs
>>>> NOW FOR BEST PART OF ALL..These Blocks are "STRONGER" & MORE DURABLE & WILL HAVE A LONGER LIFE EXPECTANCY THAN THE COMPETITION ++ "PRICED LOWER" THAN SOME OF THE COMPETITION with OUR SPECIAL LOW PRICING !
*** PRICE IS TOO LOW TO PRINT !
GET YOURS NOW..LIMITED QUANTITY !
Thanks
.